Skip to article
AHFE AHFE Discoveries AHFE International Open Access Journal
AHFE OPEN ACCESS OPEN ACCESS CONFERENCE PROCEEDINGS PAPER

Additive manufacturing in the maritime industry: Impact on production processes, workers, and end-users

Design Department, Politecnico di Milano, 20158 Milan, Italy ↗
Publication year
Digital Object Identifier10.54941/ahfe1005164

Abstract

Additive Manufacturing (AM) technologies are revolutionising global production processes, offering substantial benefits to the maritime industry by eliminating the reliance on models and moulds. This shift toward a sustainable, zero-waste future presents significant opportunities and considerations for both workers and end-users.The adoption of automated 3D printing necessitates workforce retraining, with a focus on digital technology skills, reducing the reliance on manual labour. Proactive training programs are vital to equip operators for this evolving landscape. Additionally, studies are exploring occupational health-related aspects of 3D printing, assessing whether it could create a safer working environment compared to traditional manufacturing processes.AM customisation capabilities empower designers and engineers to prioritize human factors, enhancing user experience, comfort, and usability. This approach fosters innovations aligned with the preferences and needs of end-users.This paper aims to explore the impact of AM technologies on manufacturing processes and design freedom within the maritime industry, emphasizing opportunities for improved efficiency, sustainability, and adaptive design practices to meet the sector's dynamic needs.

INTRODUCTION

Thanks to the gradual cost decrease over the past few years, additive manu- facturing (AM), also known as 3D printing, has gained more popularity and became more and more adopted among several industries, including auto- motive, biomedical, aerospace, and maritime, although to a lesser extent than the others mentioned (Boissonneault, 2019). AM can be employed for a full range of applications, such as rapid prototyping, studying product ergonomics, and end-to-end product manufacturing, meaning that it can sig- nificantly influence the entire production process, spanning from the creation of a preliminary model to the finalisation of fully assembled products (Jarža et al., 2023).

These additive technologies are based on a process where a digital model is sliced into layers, and these layers are then built up one on top of the other to create a physical object (Gibson et al., 2015, Khajavi et al., 2014). The layer-by-layer approach demonstrates its capability to produce complex

© 2024. Published by AHFE Open Access. All rights reserved. 184

Additive Manufacturing in the Maritime Industry 185

shaped components without requiring traditional machines (Ponche et al., 2017). This zero-tools methodology therefore enables greater flexibility in production, enhancing mass customisation, where products are designed to meet the customer’s needs or desires, as well as mass personalisation, where unique artifacts are manufactured for each individual (Ford and Dean, 2013). Design freedom offered by 3D printing facilitates the transition to a more sustainable production process, as optimised lightweight structures can be manufactured by strategically positioning material only where needed, thus effectively minimising waste generation (Hao et al., 2010).

Maritime industry stands to gain substantial advantages from the progress brought about by AM, as these innovative technologies have the potential to free composite production processes from the reliance on models and moulds. The current use of these tools adversely affects the industry because of their limited flexibility, their environmental implications (Musio-Sale et al., 2020), and associated costs (Peterson, 2021). In particular, moulds are not well-suited for complex designs due to the need for shape adjustments or sig- nificant investments in creating new moulds for each modification involved. An AM-oriented paradigm shift in the maritime industry could therefore help addressing longstanding challenges in the sector, making processes more versatile and open to extensive customisation possibilities.

In this perspective of innovation, it is important to critically review how the integration of AM can reshape not only the manufacturing processes but also the roles and experiences of the workforce and end-users within the indus- try. The interplay between technological advancements and human-centred issues of both workers and consumers warrants consideration. This paper will explore how AM technologies could redefine the roles of workforce in the maritime sector, examining the impacts on job roles, skills requirements, health and overall dynamics. Simultaneously, it will extend to the end-users, disclosing the influences on product customisation and associated user expe- rience. Therefore, the aim of the research is to assess the current levels of implications that additive technologies have regarding human-centred issues within the maritime industry, evaluating the opportunities that could arise from this integration.

Initially, an extensive description of the search strategy and the articles’ screening process is provided. Secondly, results regarding the impact of AM technologies on workers and end-users within the maritime industry are pre- sented. Based on the findings, discussions are conducted, finally leading to the formulation of relevant conclusions.

METHOD

The systematic exploration for pertinent documents within the realm of the research focus was carried out by leveraging the comprehensive database of Scopus. In total, four clusters, each containing a series of keywords, were designed for the search: maritime industry, additive manufacturing, workers, and end-users.

The first phase of the search strategy was done through the combination of the conceived clusters. Subsequently, further articles were found by manually researching on Google Scholar.

186 Piccioni and Ratti

The initial screening process involved reviewing the titles and abstracts of the articles, eliminating those deemed irrelevant to the research focus. Sec- ondly, remaining documents underwent a more detailed examination through in-depth reading. After this, additional studies were identified through a cross-referencing phase.

A cataloguing and organisation process was applied to the selected articles by assigning identification keywords to each one. Keywords facilitated the efficient summarisation of the subjects addressed in each article, expediting the comparison activities. The identification of thematic connections among the different works enabled their grouping based on conceptual and thematic affinities.

RESULTS

Characteristics of Studies During the exploration of pertinent studies, it was observed that the inclusion of the cluster related to the maritime sector yielded no results in the search. This suggests that the focus of this paper has not yet been extensively studied in the existing literature. Therefore, the articles selected address the research topic in broader terms, without expressly considering the target sector. Nev- ertheless, the selected studies offer valuable insights that could be suitable also for the chosen context, since the fundamental principles and concepts discussed are likely to have cross-sector applicability.

The first phase of the review identified a total of 1102 studies. Among those, after scanning titles and abstracts, 65 documents were assessed for meeting inclusion criteria. Finally, after the reading process and the cross- referencing activity, 34 studies were selected.

Out of the selected 34 studies, 23 specifically examine the implications for workers, delving into 15 studies exploring changes in required skills and six focusing on health-related aspects. One study pertains both skillsets and health. The remaining 11 studies delve into the theme of customisation and the product’s relationship with end-users.

The study uncovered articles published from 2006 to 2023, with 21 of them published in the past decade.

Traditional Boatbuilding Techniques Traditionally, the most widely used tool for the production of FRP boats is the mould, typically of the female type. In particular, the most prevalent lay-up techniques are ‘hand lay-up’ and ‘spray-up’ (Rubino et al., 2020).

In the ‘hand lay-up’ process (Andresen, 2001), reinforcement material is manually placed and then saturated with resin through the use of brushes or rollers. Adequate pressure is applied to ensure uniform resin distribution and eliminate any potential air bubbles.

A variation of manual lamination is the ‘spray-up’ method (Andresen, 2001), wherein a specially designed spray gun is used to simultaneously dis- tribute resin and short fibres. Despite the relative simplicity of these processes, they demand significant manual labour and specialised expertise. As styrene

Additive Manufacturing in the Maritime Industry 187

vapours are released into the working environment (Säämänen et al., 1991; Lindgren et al., 2002), the direct handling of materials in open-mould pro- cesses poses health risks to operators. In fact, the European UP/VE Resin Association (2021) confirms the hazards related to occupational exposure to styrene. Workers exposed to such substance may encounter side effects, such as headaches, eye irritation, and respiratory disorders (Persoons et al., 2018).

In this context, the analysis of the currently employed traditional processes serves as a foundation for a better evaluation of additive technologies’ impact. This overview not only facilitates the understanding of the opportunities pre- sented by AM but also aids in identifying any potential aspects that need further interventions.

AM Impact on Workforce Workforce Skillsets A widespread integration of AM technologies into the maritime industry could profoundly redefine the roles of its workers. With the potential to transform production processes, these innovative techniques introduce new skillsets that must be cultivated among professionals through targeted edu- cation and training initiatives. AM techniques are highly reliant on digital processes which minimise the amount of manual labour involved in object creation (Garrett, 2014). By reducing needs for manual labour in tasks such as assembly (De Vere, 2013; Muita et al., 2015), manufacturing, and finish- ing (Tuck et al., 2007), the integration of 3D printing may lead to decreased reliance on workforce required (Ben-Ner and Siemsen, 2017). While automa- tion could lessen demand for physically demanding manual jobs, it also presents an opportunity for upskilling workers to take on more technical and higher-skilled roles that leverage AM opportunities. Therefore, targeted training initiatives are important to help the workforce cultivate new digital skillsets demanded by these advanced production processes.

However, a significant challenge hindering the widespread adoption of AM is the limited knowledge of its technologies, capabilities and applications among the current workforce (Gao et al., 2015; Simpson et al., 2017). To fully leverage the opportunities brought by AM, professionals must develop a deeper understanding of both its technical processes and broader impacts on value chains (Williams and Seepersad, 2012). The importance of targeted education on AM is emphasised by Huang et al. (2013), who underscore its profound effects on both the environment and the economy.

The rapid proliferation of AM, driven by the increasing variety of mate- rials and affordability of tools, as well as the potential for exploring new application areas, has led to a noticeable absence of guidelines for its stan- dardisation within this dynamic field (Gao et al., 2015). As a result, despite the transformative potential of AM, the predominant focus in today’s educa- tion remains centred on traditional production techniques, neglecting these emerging technologies (Kriesi et al., 2014).

To meet the evolving demands of the AM-enabled market, workers require not only familiarity with digital design tools but also expertise in oper- ating the new equipment (Roos and Fusco, 2014). Practical learning and

188 Piccioni and Ratti

hands-on experience with 3D printing are crucial, as they foster creativity while enhancing comprehension of workflows (Lacey, 2010). Introducing emerging designers to AM from an early stage through university courses or industry training can instill a “think additive”mindset characterised by inno- vative problem-solving and exploitation of the technology’s design freedom (Minetola et al., 2015).

Several recommendations have been proposed with the aim of significantly promoting the depth and breadth of AM knowledge through educational initiatives. In particular, the 2009 Roadmap for Additive Manufacturing called for the development of specialised training programs and university with the aim of generating a broader awareness and enthusiasm for these technologies within society (Bourell et al., 2009). More recently, industrial gatherings like the 2015 National Science Foundation workshop brought together professionals to discuss priorities for the AM workforce. Key take- aways emphasised building fundamental engineering and materials science comprehension, as well as proficiencies in problem-solving, design leveraging AM possibilities, and collaborative ideation (Huang et al., 2015). Despeisse and Minshall (2017) outlined a series of guidelines to enhance AM skills and knowledge among professionals:

  • recognise the diversity and value of AM technologies;
  • Use new tools and approaches for designing products that are compat- ible with AM processes;
  • understand the processes and materials involved;
  • stay updated on the evolving nature of AM technology;
  • provide a balance of general and specialized education;
  • support both students and workers for the demands of the AM industry.

Workforce Health and Safety AM’s potential impact on operators extends to health and safety concerns. While AM technologies offer several advantages, the literature also tends to highlight potential occupational health risks associated with 3D printing. Various studies have reported cases of health problems experienced by work- ers operating 3D printers. AM processes in fact can release ultrafine particles and volatile organic compounds into the air (Chan et al., 2018). Central nervous system damages and respiratory symptoms such as asthma and irri- tation have been reported by industries that employ AM (Mohammadian and Nasirzadeh, 2021). In particular, As emphasised by Saliakas et al. (2023), the greatest risk of exposure to toxic substances was identified at the initiation of the extrusion process and during cleaning activities. Studies have found that working extensively with 3D printers, more than 40 hours per week, is significantly associated with an increased risk of respiratory diagnoses (Chan et al., 2018).

To mitigate these occupational health hazards, various guidelines have been proposed. Important control measures include substitution, isolation, proper ventilation of workplaces, and the wearing of protective equipment (Rim, 2023). In addition, McDonnell et al. (2016) stress the importance of using carbon filters to reduce harmful emissions. A written standard

Additive Manufacturing in the Maritime Industry 189

operating procedure outlining health and safety policies in the workplace is also recommended (Randolph, 2018). Concerning styrene vapour concen- trations, measured in parts per million (ppm), the American Conference of Governmental Industrial Hygienists (ACGIH) (ACGIH, n.d.) established the threshold limit value (TLV) for occupational exposure. The maximum allow- able exposure level for an 8-hour workday (TWA: time-weighted average) is established at 10 ppm. For brief durations (STEL: short-term exposure), typically 15 minutes, the permissible concentration is set at 20 ppm.

While many studies warn of potential risks, some research highlights how AM could potentially reduce harmful chemical exposures compared to con- ventional manufacturing (Garrett, 2014). FDM processes in particular have been deemed safe and non-toxic (Masood, 2007).

AM Impact on End-Users The demand for customisation continues to grow among consumers who seek products personalised to their unique needs and preferences. In this evolving landscape, 3D printing could play a pivotal role, advancing the industry to meet end-users’ requests (Dean and Pei, 2012; Liu and Yang, 2023). In this regard, Weller et al. (2015) state that AM proves to be particularly benefi- cial in settings where there’s a high demand for tailored products, adaptable manufacturing processes, and intricate designs.

Several findings in the literature indicate that extensive customisation pos- sibilities can redefine the relationship between products and consumers. Brun and Karaosman (2019) outline a positive correlation between the extent of customisation and the perceived value of products within the yacht indus- try. Moreover, the study emphasises that companies offering more exclusive products tend to encourage greater levels of customisation and customer engagement. A stronger emotional connection may form between customised products and their owners (Campbell and Bernabei, 2017; Liu and Yang, 2023). When preferences can be reflected in product design, users feel the item is well-suited for their specific needs (Nurkka, 2013). Consumer par- ticipation in co-design can also boost perceived value by giving individuals influence over product attributes that matter most to them (Schreier, 2006; Merle et al., 2009).

From this standpoint, companies may choose to facilitate consumer input in the design process (Valenzuela et al., 2009). Rather than developing fully- formed designs alone, designers could establish initial design frameworks for end-users to personalise according to their needs (Campbell and Bernabei, 2017). Given the renowned global reputation of the yacht industry for its exten- sive customisation practices (Bionda and Ratti, 2017), these strategies could seamlessly align with yacht design processes, potentially enhancing the inter- action between customers and design studios. In this context, Hu (2013) emphasises the pivotal role of AM as a facilitator for advancing co-design processes.

190 Piccioni and Ratti

DISCUSSION AND CONCLUSION The results of this literature review provide valuable insights into how addi- tive technologies could reshape human roles within the maritime industry, specifically examining how they could affect workers and end-users. While the findings indicate AM presents advantages such as improved flexibility and opportunities for customisation, there are also significant changes and impacts that require consideration to ensure successful implementation.

A key gap of the current literature is the lack of papers that specifically explored applications and experiences within the maritime sector. Most of the retrieved studies evaluated implications in broader contexts. To better guide 3D printing adoption in this target area, more empirical research conducted collaboratively with maritime stakeholders is needed.

On the workforce front, it is evident skills requirements will evolve signif- icantly as processes become more digitally oriented and automated with AM integration. While several studies (Garrett, 2014; De Vere, 2013; Muita et al., 2015; Tuck et al., 2007) indicate that automation may decrease demand for physically demanding manual labour, it presents an opportunity to upskill workers into higher value roles. However, the literature shows AM knowl- edge and expertise remains limited among current professionals. Large-scale training initiatives collaborating closely with both educational institutions and industry will be crucial to cultivate the new digital and technological skillsets demanded by AM. Standards and guidelines outlining education frameworks with a balanced mix of general and specialised AM training should also be developed.

Although the topic of AM occupational risks is still a matter of debate within the literature, with some papers emphasising AM’s safety (Garrett, 2014; Masood, 2007), health and safety standards specifically targeting potential hazards arising from AM material emissions must be established. Accordingly, the studies conducted by ACGIH (n.d.) represent a significant contribution. Regular review of these policies based on the latest research evi- dence will ensure they continuously safeguard worker wellbeing as new 3D printing equipment, materials and processes emerge. Preventive control mea- sures informed by robust risk assessments should minimise exposure risks to support the long-term health of AM operators. Furthermore, the high degree of automation enabled by AM, alongside its capability to decentralise pro- duction (Attaran, 2017), could enable the creation of isolated production environments that minimise the need for direct worker involvement. In that light, future studies should delve into such implications.

For end-users, AM profoundly enables greater customisation possibilities that have long been important to the maritime industry. This aligns well with growing consumer demands for tailored products that better meet individ- ual preferences and needs. In this context, valuable findings regarding the yacht industry are provided by Brun and Karaosman (2019), who found a positive correlation between customisation levels and perceived product value, suggesting AM could enhance customer engagement and satisfaction in yacht design. Enhanced co-design and engagement strategies allowing users

Additive Manufacturing in the Maritime Industry 191

more input over product attributes could further strengthen the relation- ship between manufacturers and customers. In this perspective, future studies should focus on developing a framework for advancing end-user engagement in the design process so that customisation possibilities offered by AM are maximised.

The present research was conducted within the NEMO project, initiated by the Design Department of Politecnico di Milano in collaboration with PNRR MICS (Made in Italy Circolare e Sostenibile). Since the project is addressing yacht flexible customisation through 3D printing, the results gathered in this manuscript, while broader than the core focus of NEMO, could help guide the research to consider these cross-cutting human-centred aspects in applying AM for yacht construction. Overall, continuous assessment of social impacts on both the workforce and end-users will be important to proactively address challenges and maximise benefits. With prudent navigation and management of these considerations, AM is well positioned to shape a prosperous future for the maritime industry through highly tailored products and experiences.

ACKNOWLEDGMENT

The paper is part of the research conducted for the NEMO project, initiated in collaboration between the Design Department of Politecnico di Milano and PNRR Made in Italy Circolare e Sostenibile (MICS).

REFERENCES

ACGIH (n.d.) STYRENE. The American Conference of Governmental Industrial Hygienists Website: https://www.acgih.org/styrene/. Andresen, F. R. (2001) “Open molding: Hand lay-up and spray-up”, in: ASM

Handbook, Volume 21: Composites, Miracle, D. B. and Donaldson, S. L. (Eds.). pp. 450–456. Attaran, M. (2017) The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing. Business Horizons Volume 60, No. 5. https://doi.org/10.1016/j.bushor.2017.05.011 Ben-Ner, A., and Siemsen, E. (2017) Decentralization and localization of production:

The organizational and economic consequences of additive manufacturing (3D printing), California Management Review Volume 59, No. 2. Bionda, A. and Ratti, A. (2017) “Yacht Design e fabbricazione digitale: le nuove sfide di Industria 4.0”, in: NAUTICA+++. Additive Manufacturing in Campo Navale e Nautico, Bionda, A. and Ratti, A. (Eds.). pp. 10–20. Boissonneault, T. (April 20, 2019) The biggest waves in maritime additive manufac-

turing, VoxelMatters: https://www.voxelmatters.com/biggest-waves-maritime-ad ditive-manufacturing/. Bourell, D. L., Leu, M. C., and Rosen, D. R., eds. (2009) Roadmap for Additive Manufacturing: Identifying the Future of Freeform Processing. Austin: The University of Texas at Austin Laboratory for Freeform Fabrication Advanced Manufacturing Center. Brun, A. and Karaosman H. (2019) Customer Influence on Supply Chain Man-

agement Strategies: An Exploratory Investigation in the Yacht Industry, Business Process Management Journal Volume 25, No. 2.

192 Piccioni and Ratti

Campbell, R. I. and Bernabei, R. (2017) “Increasing product attachment through personalised design of additively manufactured products”, proceedings of the 21st International Conference on Engineering Design, Vancouver, Canada, 21–25 August 2017. Chan, F. L., House, R., Kudla, I., Lipszyc, J. C., Rajaram, N., and Tarlo, S. M. (2018)

Health survey of employees regularly using 3D printers, Occupational Medicine Volume 68, No. 3. Dean, L. T. and Pei, E. (2012) “Exploring the use of additive manufacture for high value consumer products”, proceedings of the 13th Conference on Rapid Design, Prototyping & Manufacturing, Lancaster, UK, 22 June 2012. Despeisse, M. and Minshall, T. (2017) “Skills and education for additive manufac-

turing: A review of emerging issues”, proceedings of the International Conference on Advances in Production Management Systems, Hamburg, Germany, 3–7 September 2017. De Vere, I. (2013) “Industrial Design 2.0: A renaissance”, proceedings of the 15th International Conference on Engineering and Product Design Education, Dublin, Ireland, 5–6 September 2013. Ford, P. and Dean, L. (2013) “Additive Manufacturing in Product Design education:

Out with the old in and in with the new?”, proceedings of the 15th International Conference on Engineering and Product Design Education, Dublin, Ireland, 5–6 September 2013. Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., and Zavattieri, P. D. (2015) The status, chal- lenges, and future of additive manufacturing in engineering, CAD Computer Aided Design Volume 69. Garrett, B. (2014) 3D printing: New economic paradigms and strategic shifts, Global

Policy Volume 5, No. 1. Gibson, I., Rosen D., and Stucker B., eds. (2015) Additive Manufacturing Technologies: 3D printing, Rapid Prototyping, and Direct Digital Manufacturing. Berlin: Springer. Hao, L., Raymond, D., Strano, G., and Dadbakhsh, S. (2010) “Enhancing the Sus-

tainability of Additive Manufacturing”, proceedings of the 5th International Con- ference on Responsive Manufacturing - Green Manufacturing, Ningbo, China, 11–13 January 2010. Hu, S. J. (2013) “Evolving paradigms of manufacturing: From mass production to mass customization and personalization”, proceedings of the 46th CIRP Conference on Manufacturing Systems, Sesimbra, Portugal, 29–30 May 2013. Huang, S. H., Liu, P., Mokasdar, A., and Hou, L. (2013) Additive manufacturing

and its societal impact: A literature review, International Journal of Advanced Manufacturing Technology Volume 67. Huang, Y., Leu, M. C., Mazumder, J., and Donmez, A. (2015) Additive manufacturing: Current state, future potential, gaps and needs, and recommendations, Journal of Manufacturing Science and Engineering Volume 137, No. 1. Jarža, L., ˇCavlovi´c, A. O., Pervan, S., Špani´c, N., Klari´c, M., and Prekrat, S. (2023) Additive technologies and their applications in furniture design and manufacturing, Drvna Industrija Volume 74, No. 1. Khajavi, S. H., Partanen, J., and Holmström, J. (2014) Additive manufacturing in the

spare parts supply chain, Computers in Industry Volume 65, No. 1. Kriesi, C., Steinert, M., Meboldt, M., and Balters, S. (2014) “Physiological data acquisition for deeper insights into prototyping”, proceedings of NordDesign 2014 Conference, Espoo, Finland, 27–29 August 2014.

Additive Manufacturing in the Maritime Industry 193

Lacey, G. (2010) 3D printing brings designs to life, Tech Directions Volume 70, No. 2. Lindgren, M., Skrifvars, M., Sandlund, E., and Pettersson, J. (2002) Styrene emissions from the spray-up and vacuum injection processes—a quantitative comparison, American Industrial Hygiene Association Journal Volume 63, No. 2. Liu, M. and Yang, W. (2023) “Optimizing the design process of 3D printing services

for personal customization”, proceedings of the 12th International Conference Design, User Experience, and Usability Conference, Copenhagen, Denmark, 23–28 July 2023. Masood, S. H. (2007) Application of fused deposition modelling in controlled drug delivery devices, Assembly Automation Volume 27, No. 3. McDonnell, B., Guzman, X. J., Dolack, M., Simpson, T. W., and Cimbala, J. M.

(2016) “3D printing in the wild: A preliminary investigation of air quality in col- lege maker spaces”, proceedings of the 27th Annual International Solid Freeform Fabrication Symposium, Austin, USA, 8–10 August 2016. Merle, A., Jean-Louis, C., and Roux, E. (2009) “Why consumers are willing to pay for mass customized products: Dissociating product and experiential value”, in: Handbook of Research in Mass Customization and Personalization, Piller, F. T. and Tseng, M. M. (Eds.). pp. 208–225. Minetola, P., Iuliano, L., Bassoli, E., and Gatto, A. (2015) Impact of additive man-

ufacturing on engineering education - Evidence from Italy, Rapid Prototyping Journal Volume 21, No. 5. Mohammadian, Y. and Nasirzadeh, N. (2021) Toxicity risks of occupational exposure in 3D printing and bioprinting industries: A systematic review, Toxicology and Industrial Health Volume 37, No. 9. Muita, K., Westerlund, M., and Rajala, R. (2015) “The evolution of rapid produc-

tion: How to adopt novel manufacturing technology”, proceedings of the 15th IFAC Symposium on Information Control Problems in Manufacturing, Ottawa, Canada, 11–13 May 2015. Musio-Sale, M., Nazzaro, P. L., and Peterson, E. (2020) “Visions, concepts, and applications in additive manufacturing for yacht design”, proceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, Washington D. C., USA, 24–28 July 2019. Nurkka, P. (2013) “Nobody other than me knows what I want: Customizing a sports

watch”, proceedings of the 14th IFIP TC 13 International Conference on Human- Computer Interaction, Cape Town, South Africa, 2–6 September 2013. Persoons, R., Richard, J., Herve, C., Montlevier, S., Marques, M., and Maitre, A.

(2018) Biomonitoring of styrene occupational exposures: Biomarkers and deter- minants, Toxicology Letters Volume 298. Peterson, E. (2021) “Technical challenges to adopting large scale additive manufacturing for the production of yacht hulls”, proceedings of the 3rd International Conference on Human Systems Engineering and Design, Pula, Croatia, 22–24 September 2020. Ponche, R., Hascoet, J. Y., Kerbrat, O., and Mognol, P. (2017) “A new global

approach to design for additive manufacturing”, in: Additive Manufacturing Handbook: Product Development for the Defense Industry, Badiru, A. B., Valencia, V. V., and Liu, D. (Eds.). pp. 169–186. Randolph, S. A. (2018) 3D printing: What are the hazards?, Workplace Health and Safety Volume 66, No. 3. Rim, K.-T. (2023) Chemicals released from 3D printers and the prevention of work-

ers health: A literature review, Toxicology and Environmental Health Sciences Volume 15, No. 1.

194 Piccioni and Ratti

Roos, G. and Fusco, M. (2014) “Strategic implications of additive manufacturing (AM) on traditional industry business models”, proceedings of Additive Man- ufacturing with Powder Metallurgy Conference, Orlando, USA, 18–20 May 2014. Rubino, F., Nisticò, A., Tucci, F., and Carlone, P. (2020) Marine application of

fiber reinforced composites: A review, Journal of Marine Science and Engineering Volume 8, No. 1. Säämänen, A. J., Niemel Ä, R. I., Blomqvist, T. K., and Nikander, E. M. (1991) Emission of styrene during the hand lay-up molding of reinforced polyester, Applied Occupational and Environmental Hygiene Volume 6, No. 9. Saliakas, S., Damilos, S., Karamitrou, M., Trompeta, A.-F., Milickovic, T. K.,

Charitidis, C., and Koumoulos, E. P. (2023) Integrating exposure assessment and process hazard analysis: The nano-enabled 3D printing filament extrusion case, Polymers Volume 15, No. 13. Schreier, M. (2006) The value increment of mass-customized products: An empirical assessment, Journal of Consumer Behavior Volume 5, No. 4. Simpson, T. W., Williams, C. B., and Hripko, M. (2017) Preparing industry for addi-

tive manufacturing and its applications: Summary & recommendations from a National Science Foundation workshop, Additive Manufacturing Volume 13. The European UP/VE Resin Association (2021). Occupational Exposure to Styrene. Tuck, C., Hague, R., and Burns, N. (2007) Rapid manufacturing: Impact on supply chain methodologies and practice, International Journal of Services and Operations Management Volume 3, No. 1. Valenzuela, S., Dhar, R., and Zettelmeyer, F. (2009) Contingent response to self-

customization procedures: Implications for decision satisfaction and choice, Journal of Marketing Research Volume 46, No. 6. Weller, C., Kleer, R., and Piller, F. T. (2015) Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited, International Journal of Production Economics Volume 164. Williams, C. B. and Seepersad, C. C. (2012) “Design for additive manufacturing

curriculum: A problem- and project-based approach”, proceedings of the 23rd Annual International Solid Freeform Fabrication Symposium, Austin, USA, 6–8 August 2012.

Cover of the proceedings volume Human Aspects of Advanced Manufacturing, Production Management and Process Control

Explore the complete digital volume

Human Aspects of Advanced Manufacturing, Production Management and Process Control

Read this individual research paper free through the original publisher, or explore the full digital proceedings book.

ISBN 978-1-964867-22-9

Explore this ISBN in the AHFE Bookstore Listed in the July 2026 bookstore catalogue; search by ISBN to confirm current availability · Digital book purchase optional

Explore Related Research

Related research 8 matches

More papers from this volume

← Back to Research ExplorerBrowse the full library →