Skip to article
AHFE AHFE Discoveries AHFE International Open Access Journal
AHFE OPEN ACCESS OPEN ACCESS CONFERENCE PROCEEDINGS PAPER

Key Competencies for Circular Manufacturing

Politecnico di Milano, Department of Management Engineering, Lambruschini 4b, 20156 Milan, Italy ↗
Publication year
Digital Object Identifier10.54941/ahfe1003514

Abstract

The transition towards circular economy represents a major challenge faced by manufacturing companies and society alike. One key enabler of this transition is the availability of a skilled workforce, as new competencies are needed for the adoption and implementation of circular strategies, processes and practices (Jabbour et al., 2019, Bertassini et al., 2021, Marrucci et al., 2021). However, the ‘human side’ of the circular economy and the role of people-driven factors are still underrepresented in the research literature (Mies and Gold, 2021; Walker et al., 2021). The present study aims at contributing to fill this gap and supporting manufacturing stakeholders by identifying and describing key competencies for circular manufacturing.Design/methodology/approach – To achieve the above.mentioned objective, a review of the scientific and grey literature was carried out as first step. Subsequently, key competencies were validated by means of semi-structured interviews with experts from manufacturing companies and academia.Results – Seventeen key circular manufacturing competencies were identified. Technical-managerial competencies refer to those competencies enabling the main processes and activities characterizing circular manufacturing (e.g., Design and management of multiple product-service life cycles, Development and use of digital solutions as an enabling factor for the circular economy, etc.). Transversal competencies are key knowledge, skills and attitudes linked to lifelong learning, creativity, teamwork, taking initiative and responsibility. (Janssens et al., 2021).Originality/value – The present study contributes to ongoing research about circular economy by shedding light on key competencies for circular manufacturing. They can also be useful for practitioners willing to identify the skills required for circular strategies and practices, to update or create new job profiles, to check the competency level of employees and then activate training, counselling and improvement programs to fill the gap.

INTRODUCTION

In recent years, the circular economy has progressively attracted the interest of stakeholders worldwide. Recognizing the fundamental role played by the environment, its functions and interactions with the economic system, policy makers, companies, consumers and research centers have devoted more and more attention to the circular economy as an alternative to the neoclassical, linear economic model (World Manufacturing Foundation, 2021).

With the aim of achieving sustainability, the implementation of closed production and consumption loops (e.g., reduce, reuse, recycle, recover, rede- sign, remanufacture) have been promoted throughout the manufacturing sector. Several new frameworks and practices have been developed to assist manufacturers and their value networks in the implementation of circular products, processes and business models (Acerbi and Taisch, 2020) to extend the lifespan of products and eliminate waste (Fantini et al., 2015).

However, the transition towards circular manufacturing still presents seve- ral challenges (World Manufacturing Foundation, 2021). Among others, the “human side” and the role of people-driven factors have received little atten- tion (Oliveira et al., 2019; Bertassini et al., 2021; Marrucci et al., 2021). Specifically, even though it has highlighted that circular manufacturing requi- res new skills, a few studies have investigated the needed competencies so far

© 2023. Published by AHFE Open Access. All rights reserved. 120

Key Competencies for Circular Manufacturing 121

(e.g., Jabbour et al., 2019; Sumter et al., 2020; Sumter et al., 2021; Schlüter et al., 2022).

To contribute to fill this gap and support interested stakeholders in pro- gressing towards circular manufacturing, the present research study aims to answer the following research question: “What competencies are needed by industrial companies for the transition to and implementation of circular manufacturing?”.

RESEARCH DESIGN To achieve the above-mentioned objective, the research process was orga- nized into two main phases: 1) literature review; 2) expert interviews. The materials and methods applied in each phase are illustrated in the following paragraphs.

Literature Review

The literature review was carried out following the recommendations of the PRISMA 2020 statement. Accordingly, at first the research question addres- sed by this study was conceived. As reported above, it is: “What competencies are needed by industrial companies for the transition to and implementation of circular manufacturing?”

Articles for the review were identified using the Scopus database. The fol- lowing keyword combination was used in the search for the initial sample of articles: (circular or green), and (manufacturing or industry), and (training or skill* or competenc* or human or HR or people or worker* or ope- rator or profess*). Keywords were searched in articles’ abstract, title and keywords. The results of this initial search were refined using three steps: Step 1 – Application of Scopus database filters: articles and reviews as well as conference proceedings written in English and published from 2010 to 2022 were included. Step 2 - Title screening and exclusions of not relevant items. Step 3 - Reading of abstract and full text. Besides, the grey literature was surveyed because of the novelty of the topic (e.g., consultancy reports, practitioner-oriented publications, etc.).

The final sample of articles was read in-depth and analysed. Key compe- tencies were extracted from each study and tabulated in an excel file. Finally, a cross-analysis was carried out to highlight similarities and divergences, eli- minate redundant competencies, and group similar competencies in the same cluster.

Expert Interviews The list of circular competencies extracted from the literature was then validated by means of expert interviews. Semi-Structured interviews were conducted involving experts from academia and manufacturing companies. Specifically, one Italian assistant professor, who is coordinating some EU projects about circular economy in manufacturing, and three CSR/Sustai- nability Managers of Italian manufacturing companies were contacted and interviewed. Each interview lasted about one hour during which the list of

122 Pinzone and Taisch

competencies was presented to the expert and expert’s comments about its relevance, clarity and completeness were collected.

RESULTS

Table 1 reports the seventeen key circular manufacturing competencies iden- tified from the literature review and validated by experts. During the interviews, the experts confirmed the relevance of the competencies and applicability in industrial settings. They did not propose any additional competency.

Table 1. Key competencies for circular manufacturing.

Table available in the original PDF paper.

COMPETENCY DESCRIPTION REFERENCES Basics of sustainable development and circular economy Clear understanding of the holistic concept of planetary boundaries, sustainable development, and principles of circular economy.

ANE (2020); Janssens et al. (2021); Sumter et al. (2021); Cabral and Dhar (2019); Bianchi et al. (2022) Design and management of multiple product-service life cycles

Ability to design product-service systems that have multiple use cycles, to use secondary raw materials, to ensure efficiency in the use of all resources along the lifecycle.

Jabbour et al. (2019); Janssens et al. (2021); Sumter et al. (2021); Cabral and Dhar (2019); Zubir et al. (2021)

De los Rios and Charnley (2017); Jabbour et al. (2019); Phung (2019); Sumter et al. (2020); ANE (2020); Sumter et al. (2021); Zubir et al. (2021) Design and management of circular operations and production systems

Ability to develop and operate innovative transformation technologies, circular processes and systems to optimize sustainability impacts.

Design and management of circular value chains

Jabbour et al. (2019); ANE (2020); Zubir et al. (2021); Janssens et al. (2021)

Capabilities for planning, setting up and improving industrial symbiosis, integrated reverse logistics and circular value chains

Sumter et al. (2020); Sumter et al. (2021); Janssens et al. (2021)

Sustainable Marketing, Re-Marketing and Re-introduction in the market

Ability to plan demand for recovered products on secondary markets, use sustainability-oriented communication strategies, pricing and incentives to engage consumers.

Sumter et al. (2020); ANE (2020); Sumter et al. (2021); Janssens et al. (2021)

Assessment of circularity and environmental, social and economic impact

Capability to map, analyze and evaluate the environmental, social and economic impacts of systems across their lifecycles and assessment of circularity levels of business models, processes, products, etc,

Circular Value Propositions and Business Models

Sumter et al. (2020); ANE (2020); Sumter et al. (2021); Janssens et al. (2021)

Capability to develop Circular Business Propositions and Models, to create a vision and engage collaborations through value networks, to implement a roadmap toward the new circular configuration.

Janssens et al. (2021); Bianchi et al. (2022)

Analysis of external context, trends and future scenarios

Capability to identify, analyse and anticipate the influence of external factors – such as environmental trends, CE policies and regulations, standards, etc – on the company’s present and future scenarios.

Continued.

Key Competencies for Circular Manufacturing 123

Table 1. Continued.

Table available in the original PDF paper.

COMPETENCY DESCRIPTION REFERENCES Jabbour et al. (2019); Phung (2019); ANE (2020); Janssens et al. (2021) Development and use of digital solutions as an enabling factor for the circular economy Capability to develop and implement innovative solutions based on digital technologies to support the transition to circular manufacturing.

ANE (2020); Janssens et al. (2021); Bianchi et al. (2022)

System thinking Being able to approach sustainability from all sides; to consider time, space and context in order to understand how elements interact within and between systems.

Janssens et al. (2021); Bianchi et al. (2022)

Critical thinking Being able to assess information and arguments, identify assumptions, challenge the status quo, and reflect on how personal, social and cultural backgrounds influence thinking.

Problem Framing and Solving

ANE (2020); Zubir et al. (2021); Janssens et al. (2021); Bianchi et al. (2022);

Capability to formulate current or potential challenges as a sustainability problem in terms of difficulty, people involved, time and geographical scope, to identify suitable approaches to anticipating and preventing problems, and to mitigating, adapting and solving already existing problems.

Janssens et al. (2021); Sumter et al. (2021)

Creative thinking Being able to see situations, objects and problems from another point of view, to give space to one’s imagination, make original connections and think outside the box

Janssens et al. (2021)

Entrepreneurial mindset

The ability to act on ideas and opportunities and to transform them into values for others

Multidisciplinary Tea- mwork/Collaboration

Ability of understanding partnerships, enabling new ways of collaboration and dialogue across disciplines.

Janssens et al. (2021)

ANE (2020); Zubir et al. (2021); Sumter et al. (2020); Sumter et al. (2021); Janssens et al. (2021) Lifelong learning Being able to learn how to quickly learn things from different and fast evolving thematic areas.

Janssens et al. (2021); Bianchi et al. (2022)

Adaptability Being able to manage transitions and challenges in complex sustainability situations and make decisions related to the future in the face of uncertainty, ambiguity and risk.

DISCUSSION AND CONCLUSIONS The present study is one of the first that sheds light on the key competencies required for the transition towards circular manufacturing. It outlines seven- teen key competencies for circular manufacturing that should be developed in order to help companies to improve towards more sustainable production and consumption systems.

In doing so, the article provides an answer to the call raised by numerous researchers (e.g., Jabbour et al., 2019) and industrial stakeholders (e.g., ANE, 2020), and it makes a valuable contribution to our current knowledge by

124 Pinzone and Taisch

expanding and going beyond the insights provided by previous studies which were mostly focused on design-related skills (e.g., Sumter et al., 2020; Sumter et al., 2021).

The present article makes a valuable contribution to manufacturing pra- ctice, too. The circular manufacturing competencies represent a first guideli- nes that managers can use to identify the skills needed in their companies. They can be used as a simple reference to assess competencies gaps and, thus, create relevant learning and development programs (Pinzone et al., 2016). In addition, the list of competencies can be used to enrich existing job descriptions or create new job profiles. Finally, they can be a support during the recruitment process to easily identify and evaluate the characteristics of candidates to be hired.

The findings of the current research should be interpreted considering the limitations this study has. Researchers interested in circular manufactu- ring are encouraged to address those limitations in future. First, although the literature review was carried out following the recommendations of the PRIMA statement, some bias may still affect the results obtained. Second, the number of interviews can be increased and diversified to improve the robustness and generalizability of the findings. Third, the list of compe- tencies extracted from the literature could be enriched by means of empi- rical data from industrial case studies. Finally, adopting a design science approach, researchers could also develop new (digital) artifacts aimed at describing, organizing and assessing relevant competencies. In this respect, defining proficiency levels for each competency and building an ontology of circular manufacturing competencies represent promising avenues for future research.

ACKNOWLEDGMENT

The authors would like to thank Dr. Roberta D’Auria for her support during the literature search and expert interviews. This study has been partially funded by the Horizon Europe project DaCapo - GA number: 101091780.

REFERENCES

Acerbi, F., & Taisch, M. (2020). A literature review on circular economy adoption in the manufacturing sector. Journal of Cleaner Production, 273, 123086. Association of Nordic Engineers (2021). Towards a Circular Economy. Skills and

competences for STEM professional. www.nordicengineers.com. Bertassini, A. C., Ometto, A. R., Severengiz, S., & Gerolamo, M. C. (2021). Circular economy and sustainability: The role of organizational behaviour in the transition journey. Business Strategy and the Environment, 30(7), 3160–3193. Bianchi, G., Pisiotis, U., & Cabrera Giraldez, M. (2022). GreenComp The European

sustainability competence framework (No. JRC128040). Joint Research Centre (Seville site). Cabral, C., & Dhar, R. L. (2019). Green competencies: Construct development and measurement validation. Journal of Cleaner Production, 235, 887–900.

Key Competencies for Circular Manufacturing 125

De los Rios, I. C., & Charnley, F. J. (2017). Skills and capabilities for a sustainable and circular economy: The changing role of design. Journal of Cleaner Production, 160, 109–122. Fantini, P., Opresnik, D., Pinzone, M., & Taisch, M. (2015, September). The

interplay between product-services and social sustainability: exploring the value along the lifecycle. In IFIP International Conference on Advances in Production Management Systems (pp.567–574). Springer, Cham. Jabbour, C. J. C., Sarkis, J., de Sousa Jabbour, A. B. L., Renwick, D. W. S., Singh, S. K., Grebinevych, O.,... & Godinho Filho, M. (2019). Who is in charge? A review and a research agenda on the ‘human side’of the circular economy. Journal of Cleaner Production, 222, 793–801. Janssens, L., Kuppens, T., & Van Schoubroeck, S. (2021). Competences of the profes-

sional of the future in the circular economy: Evidence from the case of Limburg, Belgium. Journal of Cleaner Production, 281, 125365. Marrucci, L., Daddi, T., & Iraldo, F. (2021). The contribution of green human resource management to the circular economy and performance of environmental certified organisations. Journal of Cleaner Production, 319, 128859. Oliveira, M., Arica, E., Pinzone, M., Fantini, P., & Taisch, M. (2019, July).

Human-centered manufacturing challenges affecting European industry 4.0 ena- bling technologies. In International Conference on Human-Computer Interaction (pp.507–517). Springer, Cham. Page, M. J., McKenzie, J. E., Bossuyt, P. M., Boutron, I., Hoffmann, T. C., Mulrow, C. D.,... & Moher, D. (2021). The PRISMA 2020 statement: an updated guideline for reporting systematic reviews. Systematic reviews, 10(1), 1–11. Phung, C. G. (2019). Implications of the circular economy and digital transition on

skills and green jobs in the plastics industry. Field Actions Science Reports, Special Issue 19, 100–107. Pinzone, M., Fantini, P., Fiasché, M., & Taisch, M. (2016). A Multi-horizon, Multiobjective Training Planner: Building the Skills for Manufacturing. Advances in Neural Networks, 517. Rubio, D. M., Berg-Weger, M., Tebb, S. S., Lee, E. S., & Rauch, S. (2003). Objectif-

ying content validity: Conducting a content validity study in social work research. Social work research, 27(2), 94–104. Schlüter, L., Mortensen, L., Drustrup, R., Gjerding, A. N., Kørnøv, L., & Lyhne, I. (2022). Uncovering the role of the industrial symbiosis facilitator in literature and practice in Nordic countries: An action-skill framework. Journal of Cleaner Production, 379, 134652. Sumter, D., de Koning, J., Bakker, C., & Balkenende, R. (2020). Circular economy

competencies for design. Sustainability, 12(4), 1561. Sumter, D., de Koning, J., Bakker, C., & Balkenende, R. (2021). Key competencies for design in a circular economy: Exploring gaps in design knowledge and skills for a circular economy. Sustainability, 13(2), 776. World Manufacturing Foundation (2021). 2021 World Manufacturing Report:

Digitally Enabled Circular Manufacturing. ISBN: 978-88-943861-7-2. Zubir, M. Z. M., Lai, C. S., Zaime, A. F., Lee, M. F., Ibrahim, B., & Ismail, A. (2021).

Dimension of Green Skills: Perspectives from the Industry Experts. Journal of Technical Education and Training, 13(1), 159–166.

Cover of the proceedings volume Human Aspects of Advanced Manufacturing

Explore the complete digital volume

Human Aspects of Advanced Manufacturing

Read this individual research paper free through the original publisher, or explore the full digital proceedings book.

ISBN 978-1-958651-56-8

Explore this ISBN in the AHFE Bookstore Listed in the July 2026 bookstore catalogue; search by ISBN to confirm current availability · Digital book purchase optional

Explore Related Research

Related research 8 matches

More papers from this volume

← Back to Research ExplorerBrowse the full library →