Skip to article
AHFE AHFE Discoveries AHFE International Open Access Journal
AHFE OPEN ACCESS OPEN ACCESS CONFERENCE PROCEEDINGS PAPER

Evaluation of Camera APP Interface Element Layout Based on Interface Aesthetics Model

1 School of Mechanical Engineering, Southeast University, Nanjing 211189, China ↗
2 Jiangsu Nangao Innocation Center for Intelligent Equipment, LTD, China ↗
Publication year
Digital Object Identifier10.54941/ahfe1001954

Abstract

With the popularity of large-screen smartphones, more and more mobile applications are appearing in the market. However, there are few studies on the comprehensive aesthetics of these application interfaces. In order to effectively evaluate the comprehensive aesthetics of the app interface and provide a reference for App interface design. By studying the characteristics of mobile application interfaces and combining expert opinions, this study selects six of the 13 interface aesthetics indicators proposed by Ngo as the criteria for evaluating the aesthetics of mobile interfaces in this paper, they are balance, symmetry, sequence, simplicity, density and regularity. By using a series of algorithms to quantify these six indicators and introducing hierarchical analysis (AHP) to calculate the weight of each aesthetic indicator, the comprehensive aesthetic value of the App interface is finally obtained. Therefore, this paper proposes a method for evaluating the comprehensive aesthetics of App interfaces. Moreover, this paper takes the interfaces of six photography applications as examples, and calculates their comprehensive aesthetic value by abstracting the App interface elements into different rectangles, and after optimizing the design of the interface with the lowest value, the comprehensive aesthetics of its interface is calculated again, and the results show that the comprehensive aesthetics of the optimized App interface is higher than the comprehensive aesthetics of the original interface. This verifies the effectiveness of the method for evaluating the comprehensive aesthetics of App interfaces and helps designers to improve the design of existing application interfaces.

INTRODUCTION

The interface includes software interface and hardware interface. The sof- tware interface (user interface,UI) discussed in this paper mainly refers to the interface which can make people communicate with computers, and the interface design can improve the user’s efficiency while improving the interface aesthetics by designing and layout the elements in the interface (Lai, 2010).

Ngo et al. (2002) proposed 13 indicators to evaluate the aesthetics of interfaces from different dimensions. By using these aesthetics indicators, the qualitative indicators of interface aesthetics can be quantified and the scientific nature of interface aesthetics evaluation can be improved (Lai, 2010).

SELECTION OF EVALUATION MEASURES Taking into account the functional differences of camera APP interfaces, through user interviews and designer guidance, this study selected six specific aesthetic measures as evaluation measures to quantify.

© 2022. Published by AHFE Open Access. All rights reserved. 338

Evaluation of Camera APP Interface Element Layout Based on Interface Aesthetics Model 339

Measure of Simplicity Simplicity refers to the degree of alignment between elements (Ngo, 2003).

Equations and mathematical formulas are available in the original paper PDF.

Here nv and nh are the number of different x and y coordinates; n set as the total number of rectangles.

Measure of Sequence A sense of sequence is a necessary requirement for any interface design.

qj−vj

8 ∈[0, 1]. (2)

Equations and mathematical formulas are available in the original paper PDF.

i

wLR, wLL, wUR,wUL

The LR, LL, UR, UL are the four quadrants, nj set as the number of rectan- gle in j part and aij set as the size of rectangle i in part j (Sun and Xue, 2021).

Measure of Symmetry For measuring the symmetry of the interface (Ngo, 2003).

SYMvertical

SYMhorizontal

SYMradial

3 ∈[0, 1] . (6)

′ UL −X

′ UR

′ LL −X

′ LR

′ UL −Y

′ UR

′ LL −Y

′ LR

X

X

Y

Y

′ UL −H

′ UR

′ LL −H

′ LR

′ UL −B

′ UR

′ LL −B

′ LR

+ H

H

′ UL −θ

′ UR

′ LL −θ

′ LR

′ UL −R

′ UR

′ LL −R

′ LR

R

+ θ

θ

R

′ UL −X

′ LL

′ UR −X

′ LR

′ UL −X

′ LL

′ UR −Y

′ LR

X

X

Y

Y

′ UL −H

′ LL

′ UR −H

′ LR

′ UL −B

′ LL

′ UR −B

′ LR

+ H

H

′ UL −θ

′ LL

′ UR −θ

′ LR

′ UL −R

′ LL

′ UR −R

′ LR

+ θ

θ

R

R

′ UL −X

′ LR

′ UR −X

′ LL

′ UL −Y

′ LR

′ UR −Y

′ LL

X

X

Y

Y

′ UL −H

′ LR

′ UR −H

′ LL

′ UL −B

′ LR

′ UR −B

′ LL

+ H

H

′ UL −θ

′ LR

′ UR −θ

′ LL

′ UL −R

′ LR

′ UR −R

′ LL

+ θ

θ

R

R

X,

J, Y,

J, H,

J, B,

J, θ,

J, R,

J can be obtained by normalization.

. (10) i nj X

yij −y

. (11) i nj X

hij. (12) i nj X

bij. (13) i nj X

yij −yc xij −xc

i

(xij, yij) and (xc, yc) indicate the center coordinate of rectangle i in part j and interface, respectively; hij and bij represent the length and width of the rectangle.

Measure of Density A degree of tightness in the interface (Ngo, 2003).

i ai aframe

∈[0, 1]. (16) Among them, ai and aframe are the area of the rectangle and the interface.

Evaluation of Camera APP Interface Element Layout Based on Interface Aesthetics Model 341

Measure of Balance It refers to the sense of stability (Ngo, 2003).

BMvertical

BMhorizontal

i

T, D, L and R are up, down, left and right; dij set as the distance from the rectangle midline to the app midline (Xie et al., 2021).

Measure of Regularity Regularity refers to the degree of consistency between interface elements (Ngo, 2003).

RMalignment

RMspacing

2 ∈[0, 1] . (21)

Nv, nh and n have the same meaning as above; ns represents the number of different intervals between the different x and y coordinates of rectangles.

METHODOLOGY AND RESULTS The test selects the top 6 camera APPs in APP store as the sample, abstracts the functional partition as the smallest rectangle, draws it with the rectangle tool in Photoshop, and reads the width and height as well as the X and Y coordinates of each element in the interface as raw data input as shown in Table 1.

A Comprehensive Evaluation Method for Layout Aesthetics Based on AHP Hierarchical analysis was used to allow designers to assign values to six aesthetic indicators by comparing them two by two to determine the relative importance of the indicators (Lai, 2010). The consistency of the judgment matrix was also checked, and if it is reasonable, the weights were standardi- zed and brought into the equation (24) for calculation (Zheng et al., 2009).

Table 1. Interface App 6 camera.

Table available in the original PDF paper.

Table 2. Specific parameters of each element in the camera interface 1 C SMM SQM SM DM BM RM

Table available in the original PDF paper.

SMM 1 5 2 3 1 3 SQM 1/5 1 1/3 1/3 1/5 1/2 SM 1/2 3 1 1 1/2 4 DM 1/3 3 1 1 1/5 2 BM 1 5 2 5 1 7 RM 1/3 2 1/4 1/2 1/7 1

Then the order of each interface is obtained by comparison, and then the existing interface design can be optimized according to the data.

The maximum eigenvalue of matrix C is obtained by Matlab software: L max = 6.2200, and the weight vector is [0.2724, 0.047, 0.1564, 0.1119, 0.3491, 0.0632]. Then the RI = (0, 0.58, 0.96, 1.12, 1.24) is obtained CRRI = 0.0355 < 0.1, verify that the consistency of the above matrix is in accordance with the criteria.

The Evaluation of the Aesthetics Measure of Each Camera APP According to equations (1) to (23), the six aesthetic indexes of each app are calculated separately, and the weight values obtained from the hierarchical analysis above are brought into the equation (24) to obtain the comprehen- sive interface aesthetic of each program. The corresponding data are obtained as shown in Table 2.

With the results shown in Table 3, we can see that in all six interfaces, camera 1 has the highest score and camera 3 has the last score, for many reasons.

Evaluation of Camera APP Interface Element Layout Based on Interface Aesthetics Model 343

Table 3. Calculated values for each aesthetic index of the camera App interface.

Table available in the original PDF paper.

Number SMM SQM SM DM BM RM Comprehensive aesthetics

1 0.06 0.5 0.32 0.15 0.89 0.32 0.4369 2 0.14 0 0.89 0.07 0.40 0.17 0.3343 3 0.07 0.25 0.80 0.12 0.37 0.17 0.3077 4 0.06 0 0.76 0.14 0.51 0.28 0.3486 5 0.06 0 0.76 0.14 0.57 0.36 0.3728 6 0.07 0.5 0.83 0.11 0.59 0.26 0.4059

Table 4. Comparison of the aesthetic measures of the NO.3 interface before and after optimization.

Table available in the original PDF paper.

As shown in Tab 1, the function key of camera 1 is basically symmetrical in the left and right direction, the distribution is uniform, the function key is mainly concentrated in the lower part, and the interface appears to be relatively stable and balanced. The function key of camera 3 in the middle position breaks the symmetry relation between the left and right, and the function key of the right half of the interface is obviously more than that of the left half, which forms the obvious effect of right weight and left light visually.

Improved Programmes The design of the interface of camera 3 was redesigned to obtain the interface shown in Table 4, and the same method as above was used to test the design results. According to Equation (24), the final comprehensive aesthetic of the interface of camera 3 is: D = 0.5044>0.3077. From the calculated values, it can be seen that the overall aesthetic score of the design solution has been improved to some extent, so the method can guide the improvement of the design solution to some extent.

DISCUSSION AND CONCLUSION In this study, six aesthetic evaluation values were extracted and quantified according to the characteristics of mobile camera applications; and the wei- ghts of each index were obtained by AHP method to establish a set of models for evaluating the comprehensive aesthetics of mobile camera interfaces. By calculating and comparing the comprehensive aesthetic values of the interfa- ces of the six apps and optimizing the interfaces, it is verified that the method can scientifically guide the improvement of the interface design scheme. How- ever, there are still shortcomings in this research work: when dealing with camera APP interfaces, elements of different shapes are uniformly treated as rectangles, so the influence of shapes on interface aesthetics is not taken into account. In order to better help designers and users select and optimize inter- face design solutions, further research will be conducted in future studies by taking the shapes of elements into account.

REFERENCES

Lai, Chien-Yin et al., 2010. Computational models and experimental investigations of effects of balance and symmetry on the aesthetics of text-overlaid images. International journal of human-computer studies, 68(1), pp. 41–56. Ngo, David Chek Ling, Teo, Lian Seng & Byrne, John G, 2002. Evaluating Interface

Esthetics. Knowledge and information systems, 4(1), pp. 46–79. Ngo, David Chek Ling, Teo, Lian Seng & Byrne, John G, 2003. Modelling interface aesthetics. Information sciences, 152, pp. 25–46. Sun, Yaqi & Xue, Chengqi, 2021. Aesthetic Evaluation of Card Game Interface Based

on Analytical Hierarchy Process. In Advances in Usability, User Experience, Wea- rable and Assistive Technology. Lecture Notes in Networks and Systems. Cham: Springer International Publishing, pp. 1061–1070. Xie, Ziyi, Wu, Wenyu & Xue, Chengqi, 2021. Evaluation of the Layout of Home Game Console Interface Elements Based on Aesthetic Calculation. In Advances in Industrial Design. Lecture Notes in Networks and Systems. Cham: Springer International Publishing, pp. 999–1006. Zheng, Xianjun et al., 2009. Correlating low-level image statistics with users -

rapid aesthetic and affective judgments of web pages. Proceedings of the SIGCHI Conference on human factors in computing systems, pp. 1–10.

Cover of the proceedings volume Ergonomics In Design

Explore the complete digital volume

Ergonomics In Design

Read this individual research paper free through the original publisher, or explore the full digital proceedings book.

ISBN 978-1-958651-23-0

Explore this ISBN in the AHFE Bookstore Listed in the July 2026 bookstore catalogue; search by ISBN to confirm current availability · Digital book purchase optional

Explore Related Research

Related research 8 matches

More papers from this volume

← Back to Research ExplorerBrowse the full library →