Skip to article
AHFE AHFE Discoveries AHFE International Open Access Journal
AHFE OPEN ACCESS OPEN ACCESS CONFERENCE PROCEEDINGS PAPER

Health and occupational risks analysis in custom border offices

University Politehnica of Bucharest, Splaiul Independentei 313, 060042, Bucharest Romania ↗
Publication year
Digital Object Identifier10.54941/ahfe1001040

Abstract

In line with National and European regulations, containing recommendations on the application of legal safety and health requirements for work and for the use of work equipment, the risk analysis has been conducted for two different positions in custom border offices, such as: the custom officer, acting in the non-destructive control department and the customs laboratory, including laboratory physician, biologist, chemical engineer, biochemist. This article aims to present the risk analysis performed using the national method for assessing the risks of accidents and occupational diseases of workers, in order to facilitate the fulfillment of obligations of employers in the prevention of risks at work. The results are compared with those obtained using questionnaires method, based on Delphi approach. Finally, recommendations are addressed to all interested parties, such as: employers and workers in operational processes. A brief action plan is drafted to support regulations implementation in custom border offices.

Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7

INTRODUCTION

The fundamental role of risk assessment is specified in the European Union Framework Directive, 89/391 / EEC, transposed into national law on safety and health at work (Ayrault, 2005; Guidlines, 2003; Gowland, R, 2006; Official Gazette of Romania, 2006). Employers have a general responsibility to ensure the health and safety of workers in all aspects of work (Official Gazette of Romania, 2006). The assessment of occupational risks is an essential stage of their prevention, because based on the results recorded in this stage it is decided whether or not it is necessary to eliminate / reduce any risks.

The General Directorate of Customs operates within the National Agency for Fiscal Administration, it coordinates and guides at the territorial level 8 Regional Customs Directorates, within which are organized 89 border customs offices and inland customs offices. More than 60% of the current activities of the customs authority (customs and fiscal supervision, customs control or authorization and movement of excisable products) indirectly result in the collection of duties, and those of customs supervision and control carried out mainly at border customs offices aim to achieve an adequate level of security and safety for the EU's external border.

Approximately 2400 customs workers contribute to the fulfillment of specific tasks, based on existing good practices at European and international level in the field of customs and taxation, using an integrated customs information system, vehicles, means of non-destructive control or surveillance located at the border, teams canines for the detection of drugs, tobacco products and cash and a customs laboratory.

THE RISK ASSESSMENT OF OCCUPATIONAL HEALTH AND SAFETY The method developed aims to quantitatively determine the level of risk / safety for a job, sector, section or enterprise, based on systemic analysis and assessment of the risks of occupational injury and illness (Guidlines, 2003; ASRO, 2005; ARAMIS, 2013). The completion consists of the filling in a centralizing document (the Work Evaluation Sheet), which includes the level of global risk at work. The job description thus prepared is the basis for substantiating the program for the prevention of accidents at work and occupational diseases for the workplace, sector, department or company analyzed.

METHODOLOGY

The principle of the method is to identify all risk factors in the analyzed system (workplace) based on pre-established checklists and quantify the level of the risk based on the

Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7 combination of severity and frequency of the maximum foreseeable consequence. The method comprises the following mandatory steps: 1. defining the system to be analyzed (workplace); 2. identification of risk factors in the system; 3. assessment of the risks of occupational injury and illness; 4. prioritizing risks and setting prevention priorities; 5. proposing prevention measures.

Working tools, in a system, necessary for the evaluation of work safety, described above, are made using the following: 1. risk factor identification list; 2. list of possible consequences of the action of risk factors on the human body; 3. scale of severity and probability of consequences; 4. risk assessment grid; 5. scale for rating risk levels and security levels, respectively; 6. job description - summary document; 7. proposed action sheet.

The structure and content of these tools are presented below.

1. Risk factor identification list - is a form that includes, in an easily identifiable and compressed form, the main categories of risk factors for occupational injury and illness, collected and sorted according to the criterion of the generating element within the work system (executor, workload, means of production and working environment). 2. The list of possible consequences of the action of risk factors on the human body is a helpful tool in applying the scale of severity of consequences. It includes the categories of injuries and injuries to the integrity and health of the human body, the possible location of the consequences in relation to the anatomical-functional structure of the body and the minimum severity (negligible consequences, minor injuries) - maximum (death) of the consequence. 3. The rating scale of the severity and probability of the consequences of the action of risk factors on the human body is a grid for classifying the consequences in severity classes and probability classes of their occurrence.

ASSESSMENT TOOL A centralised form developed to identify necessary prevention measures to be applied, resulting from the evaluation of the workplace in terms of work safety may be summaried in the job evaluation sheet for the custom staff (table 1). The methodology may be applied irrespective of the field of activity by identifying the specifc risks per work system components, then assessing the severity, the probability of occurrence and the risk level.

Table 1. Workplace assessment sheet for the job custom officer Table legend: WSC Work system component; MPC Maximum predictable consequence;

Table available in the original PDF paper.

S Severity; PC Probability class; RL Risk level: TLI Temporarily labour unavailability Unit: National Customs Authority Section: Non-destructive control equipment Department

Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7

Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7

Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7

Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7

For a visualized analysis, risk factors are graphically represented. A similar analysis is performed for the job custom laboratory including laboratory doctor, biologist, chemist, biochemist. The analysis consists of work evaluation sheet (similar to table 1) and then the graphical analysis. The highest risk level in this case resulted 5 corresponding to radiation risk due to devices screens.

Another possible method to proceed to the risk assessment is based on questionnaires applied to workers in the concerned jobs (ARAMIS, 2013). This approach is reported elsewhere (Nalbitoru, Severin, 2021). The overall results for the two different positions in the custom border offices are summarized in table 2.

Table 2. Workplace assessment sheet for the job custom officer Category Global level of risk questionnaire method Global level of risk external assessment Custom workers 3.1 3 Custom laboratory staff 3.18 3.15
Original PDF Table 2.

CONCLUSIONS

The evaluation consists in identifying and prioritizing the existing risks, in order to implement appropriate mitigating actions. Based on the evaluation, in the case of risk exceeding the global level of 3, mitigation action should be implemented to eliminate or reduce occupational risk factors, such as:

  • redesign of the activity: modification of the content of the activity, enrichment of tasks,

alternation of different tasks, elimination of fractional and simplified activities;

  • organizational measures: changing the way the activity is organized - greater autonomy, assigning responsibilities, increasing the autonomy of teams of workers in managing tasks and work pace;

Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7

  • rational organization of working and rest time, work schedule that allows extraprofessional activities; work space optimization: avoiding overloading the work space or, on the contrary, working in isolation;
  • ergonomic measures and optimization of the work environment; control of occupational

risks, optimization of environmental factors (microclimate, lighting, coloring etc.) and workplace arrangement etc.;

  • appropriate information on the work (production) process, early information on any technological change and the introduction of new techniques and technologies;
  • training workers, employees in making decisions on organizational measures, working

methods; appropriate training and education: an education in the field of health, knowledge and recognition of risks, preventive measures. As measures to improve the psychosocial environment would be: staff participation in decision making, appreciation and encouragement from superiors, support from colleagues and subordinates, job retention, prospects in professional promotion etc., all creating a sense of individual control over the social environment.

The major improvement concerning the occupational health and safety has been linked to the investment in new roboscanners, systems completely remote, operated by a single operator, completely eliminating the risk of professional and accidental irradiation ; the operator remotely controls all processes via wireless network from the mobile control center placed outside the exclusive.

REFERENCES

Ayrault, N., Evaluation des dispositifs de prévention et de protection utilisés pour réduire les risques d’accidents majeurs (DRA-039), Rapport Oméga 10 – Evaluation des barrières techniques de sécurité, INERIS, France, (2005). ARAMIS: Accidental Risk Assessment Methodology for Industries in the framework of

SEVESO II directive - User guide, Projet européen no EVG1-CT-2001-00036 (http://mahb.jrc.ec.europa.eu). Gowland, R., The accidental risk assessment methodology for industries (ARAMIS)/layer of protection analysis (LOPA) methodology: a step forward towards convergent practices in risk assessment. Journal of Hazardous Materials, vol. 130 (3) (2006) Law 319/2006 on safety and health at work, Official Gazette of Romania, Part I no. 646 of

July 26, (2006) Nalbitoru G., Severin I., Occupational risk assessment in border and inland custom offices, Conference IBIMA 38, Seville Nov. 2021 under review National Research and Development Institute for Labor Protection, Guidelines and method

for assessing the risks of accidents and occupational diseases at work, Bucharest, (2003) SR CEI 61508, parts 1...7 ; SR EN 61511, parts 1...3 - Functional safety. Romanian Standardization Association (ASRO), Bucharest, 2001-2003.

Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7

Cover of the proceedings volume Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems

Explore the complete digital volume

Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems

Read this individual research paper free through the original publisher, or explore the full digital proceedings book.

ISBN 978-1-7923-8988-7

Explore this ISBN in the AHFE Bookstore Listed in the July 2026 bookstore catalogue; search by ISBN to confirm current availability · Digital book purchase optional

Explore Related Research

Related research 8 matches

More papers from this volume

← Back to Research ExplorerBrowse the full library →