Skip to article
AHFE AHFE Discoveries AHFE International Open Access Journal
AHFE OPEN ACCESS OPEN ACCESS CONFERENCE PROCEEDINGS PAPER

Implementation Strategies for Intelligent Systems to Support Manufacturing Planning: Recommended Actions to Avoid Failure

Institute of Industrial Engineering and Ergonomics (IAW), RWTH Aachen University, Germany ↗
Publication year
Digital Object Identifier10.54941/ahfe1003511

Abstract

In many manufacturing enterprises, manufacturing planning for the production of complex components is carried out by using CAM systems (CAM: Computer-Aided Manufacturing) (Bi and Wang, 2020). The increasing complexity and individualization of components, tools and machines lead to new requirements for manufacturing planning and CAM systems (Suhl and Isenberg, 2019; Jayasekara et al., 2019). Providers of CAx systems and researchers are currently working on the further development of conventional support systems by incorporating artificial intelligence (AI) applications (e.g. Dripke et al., 2017).AI-based, intelligent support systems are intended to enable employees to perform the increasingly complex process of manufacturing planning quickly and efficiently (cf. Burgert et al., 2022). At the same time, studies in Germany (e.g. Lundborg and Gull, 2021; Merkel-Kiss and von Garrel, 2022) indicate that available AI-based systems are generally rather used with restraint, especially by SMEs, or not used effectively, e.g., due to acceptance issues. Since a successful implementation of these systems requires appropriate strategies (Kletti, 2007; cf. Bellantuono et al., 2021; cf. Kovrigin and Vasiliev, 2020), insufficient implementation strategies could be a reason for the restraint. However, existing implementation strategies within the application context of manufacturing planning do not specifically focus on intelligent support systems, but rather on conventional digital ones in general. This paper addresses the research question of how to design an implementation strategy for intelligent support systems for manufacturing planning to ensure a successful implementation for the long term.First, a systematic literature review was conducted to identify success factors and corresponding recommendations for action in the context of implementation strategies for digital support systems in manufacturing. The recommendations for action were aggregated into 27 recommendations within the categories organization, people, technology, and data. Second, 31 experts with experience in implementing support systems in a corporate context were asked to assess the importance of these recommendations for action for the successful implementation of intelligent support systems for manufacturing planning in an online questionnaire. The questionnaire also included the assignment of the recommendations for action to five phases of a generic implementation model. Additional suggestions based on the participants' own professional experience could be added.In this paper, the methodological approaches and the results of the literature review as well as the empirical study within the context of intelligent support systems for manufacturing planning are presented. The results show, e.g., that most of the recommendations concern the interaction with the employees affected. Furthermore, many of the recommended actions are important for most or even all phases of an implementation process. Finally, the resulting recommendations for action concerning the implementation of intelligent support systems for manufacturing planning and related limitations are discussed.

INTRODUCTION

In many manufacturing enterprises, manufacturing planning for the production of complex components is carried out by using CAM systems (CAM: Computer Aided Manufacturing) (Bi and Wang, 2020). The increasing complexity and individualization of components, tools and machines lead to new requirements for manufacturing planning and CAM systems (Suhl and Isenberg, 2019; Jayasekara et al., 2019). Providers of CAx systems and researchers are currently working on the further development of conventional support systems by incorporating artificial intelligence (AI) applications (e.g. Dripke et al., 2017). At the same time, studies in Germany (e.g. Lundborg and Gull, 2021; Merkel-Kiss and von Garrel, 2022) indicate

© 2023. Published by AHFE Open Access. All rights reserved. 88

Implementation Strategies for Intelligent Systems to Support Manufacturing Planning 89

that available AI-based systems are generally rather used with restraint, especially by SMEs, or not used effectively, e.g., due to acceptance issues. Since a successful implementation of these systems requires appropriate strategies (Kletti, 2007; cf. Bellantuono et al., 2021; cf. Kovrigin and Vasiliev, 2020), insufficient implementation strategies could be a reason for the restraint. However, existing implementation strategies within the application context of manufacturing planning do not specifically focus on intelligent support systems, but rather on conventional digital ones in general. Therefore, recommendations for action for the implementation of digital support systems in manufacturing were identified and then evaluated in the context of intelligent systems to support manufacturing planning. Based on this, first implications are expected for the development and implementation of an intelligent CAM system in the research project CAM2030.

This paper addresses the research question of how to design an implementation strategy for intelligent support systems for manufacturing planning to ensure a successful implementation for the long term. An implementation strategy is understood as a plan for introduction, presented in the form of recommendations for action with reference to a procedural model (cf. Tarlatt, 2001). The scope of implementation is considered in a broad sense, from the definition of goals and the system selection to the continuous improvement of the introduced system. First, a systematic literature review was conducted to identify success factors and corresponding recommendations for action in the context of implementation strategies for digital support systems in manufacturing. Second, 31 experts with experience in implementing support systems in a corporate context were asked to assess the importance of these recommendations for the successful implementation of intelligent support systems for manufacturing planning in an online questionnaire. The questionnaire also included the assignment of the recommendations for action to phases of a generic implementation model.

In this paper, the procedure and the results of the literature review as well as the empirical study are presented. Finally, the resulting recommendations for action concerning the implementation of intelligent support systems for manufacturing planning and related limitations are discussed.

SYSTEMATIC LITERATURE REVIEW In the following, the search and selection procedure as well as the results of the systematic literature review are presented.

Search and Selection Procedure The literature review was conducted based on the STARLITE approach (Booth, 2006) complemented by the PRISMA statement (Page et al., 2021). The STARLITE elements were set as follows: The selective sampling strategy, no restriction regarding the type of studies, the approach electronic subject search, the range of years from January 2000 to October 2022, and the

functional limits to English and German-language publications as well as the manufacturing context as inclusion were applied. The terms used as search query was: (implementation OR launch OR introduction) AND strategy AND digital AND system AND (production OR manufacturing). As electronic source, the databases Scopus (Elsevier B.V.), IEEE Xplore (IEEE), and Web of Science (Clarivate) were used.

In the first step, the search resulted in a collection of 1182 papers. After removing duplicates (n = 227) as well as non-German and non-English publications (n = 27), 928 articles remained which were examined by reviewing title and keywords. In this step, 742 publications were excluded especially due to a missing reference to manufacturing or digital system context. By reviewing the abstracts of the remaining 186 publications, 133 publications were further excluded based on their relevance for the given context. Subtracting seven articles that could not be retrieved, 46 publications as well as two additional articles found through a manual reverse search were examined based on their full texts.

Identified Success Factors and Recommendations for Action for the Implementation of Digital Support Systems in Manufacturing Success factors for the implementation of digital support systems in the manufacturing context were extracted and aggregated. The results were classified into four categories: organization, people, technology, and data. Table 1 shows the aggregated organization-related success factors and recommendations for action.

A flexible organizational structure can promote the implementation of digital technologies (Albukhitan, 2020). In this context, a multidisciplinary team structure with clear tasks and responsibilities is recommended for managing the implementation (Albukhitan, 2020; Bellantuono et al., 2021). Another success factor is the identification of short- and long-term

Table 1. Organization-related success factors and recommendations for action.

Table available in the original PDF paper.

Factor with related recommendations for action Reference (Excerpt) Albukhitan, 2020 Albukhitan, 2020 Bellantuono et al., 2021 Organizational structure O01: Assemble suitable team for the implementation O02: Clearly distribute implementation responsibilities and tasks

Bellantuono et al., 2021 Bellantuono et al., 2021

Organizational goals for implementation O03: Identify short- and long-term goals for implementation

Albukhitan, 2020 Bellantuono et al., 2021

Communication O04: Communicate information about the change taking place

Kovrigin and Vasiliev, 2020 Albukhitan, 2020 Kovrigin and Vasiliev, 2020

Capital O05: Plan the investment process in detail O06: Make sufficient investment in staff (training, education etc.)

Implementation Strategies for Intelligent Systems to Support Manufacturing Planning 91

goals for implementation (Bellantuono et al., 2021). Changes resulting from implementation should be continually communicated to all affected employees to inform and promote technology acceptance (Albukhitan, 2020; Bellantuono et al., 2021).

From a financial perspective, the implementation requires sufficient investments not only in digital technology, but also particularly in employees (e.g. training) (Kovrigin and Vasiliev, 2020). In order to justify the investment, it should be planned in detail (Kovrigin and Vasiliev, 2020; Albukhitan, 2020). The people-related results are presented in Table 2. When introducing digital systems, the training of employees involved is essential for avoiding resistance to change and thus for the implementation success (Bellantuono et al., 2021). Training programs should not only cover digital skills for operating the system, but also capabilities, e.g. for teamwork and effective communication (Bellantuono et al., 2021). In addition, training programs for the managers are seen as a promoting factor for the success of an implementation (Azevedo and Almeida, 2021). In the context of digital transformation in SMEs, Azevedo and Almeida (2021) present a management training program that includes technological insights as well as obstacles and opportunities for implementation.

Apart from training programs, a participatory and human-centered implementation approach that actively involves all affected employees is recommended (Bellantuono et al., 2021). To avoid implementation resistance, resistance must first be identified and then managed, e.g. by discussing the reasons, goals, benefits, and timetable with all employees involved

Table 2. People-related success factors and recommendations for action.

Table available in the original PDF paper.

Factor with related recommendations for action Reference (Excerpt) Bellantuono et al., 2021 Bellantuono et al., 2021 Bellantuono et al., 2021 Shinohara et al., 2017 Training of employees P01: Plan training programs for employees P02: Conduct training programs for employees P03: Adjust workload to create capacity for training programs

Training of managers P04: Plan training programs for managers P05: Conduct training programs for managers

Bellantuono et al., 2021 Bellantuono et al., 2021

Azevedo and Almeida, 2021 Azevedo and Almeida, 2021 Azevedo and Almeida, 2021 Participation P06: Involve affected stakeholders in implementation planning P07: Identify resistance to implementation P08: Managers show commitment

Bellantuono et al., 2021 Albukhitan, 2020 Employees’ motivation and acceptance P09: Ensure support by managers P10: Ensure simple operability P11: Ensure data protection, work safety, and data security

Kandler et al., 2022 Merhar et al., 2019 Merhar et al., 2019 Merhar et al., 2019 External support P12: Consider collaboration with external consultants P13: Hire new employees with required competencies

Albukhitan, 2020 Albukhitan, 2020 Albukhitan, 2020

(Bellantuono et al., 2021). Additionally, the management should show high commitment and pass this on to employees as part of the digital transformation process (Albukhitan, 2020).

Employees’ motivation and acceptance are critical success factors (Kandler et al., 2022). Thereby, a participatory implementation is considered as key influence on the acceptance of the system (Kandler et al., 2022). To promote acceptance, support from managers, a simple operability of the system, and ensuring data protection, work safety, and data security are recommended (Merhar et al., 2019). If the expertise available within the enterprise is not sufficient, external sources (consultants, hiring new employees) should be considered (Albukhitan, 2020).

The technology-related success factors and recommendations for action are shown in Table 3. Since the integration of digital systems into enterprises is hampered if digital solutions only replace single process steps, automating adjacent manual processes can facilitate the implementation (Albukhitan, 2020). Moreover, a successful implementation is enhanced if the digital transformation process includes several business activities (Albukhitan, 2020). In terms of technological requirements, the availability of suitable hardware is a critical success factor for system implementation (Shinohara et al., 2017).

Regarding data-related success factors and recommendations for action (Table 4), data availability and data management is a critical success factor for implementing digital systems in manufacturing (Shinohara et al., 2017). A data analytics strategy guides an effective data collection and analysis to support decision-making as well as enables the use of data- driven digital systems (Geissbauer et al., 2016; Shinohara et al., 2017). During the implementation process, feedback data should be collected and processed from stakeholders involved in the change in order to identify critical issues as basis for corrective actions (Bellantuono et al., 2021). Furthermore, stakeholders should be provided with sufficient information on the implementation process, e.g. regarding the roadmap (Bellantuono et al., 2021). Another success factor addresses the data exchange between departments. This can be supported by reducing the variety of different systems for each department and enabling interoperability (Shinohara et al., 2017). Additionally, competitive thinking between departments should be reduced (Kovrigin and Vasiliev, 2020).

Table 3. Technology-related success factors and recommendations for action.

Table available in the original PDF paper.

Factor with related recommendations for action Reference (Excerpt) Digital/automated processes T01: Automate adjacent manual processes T02: Digitize existing business processes Albukhitan, 2020 Albukhitan, 2020 Albukhitan, 2020 Technological requirements T03: Provide suitable hardware

Shinohara et al., 2017 Shinohara et al., 2017

Implementation Strategies for Intelligent Systems to Support Manufacturing Planning 93

Table 4. Data-related success factors and recommendations for action.

Table available in the original PDF paper.

Factor with related recommendations for action Reference (Excerpt) Shinohara et al., 2017

Geissbauer et al., 2016 Bellantuono et al., 2021 Bellantuono et al., 2021

Data availability and data management (collection/processing) D01: Develop effective data analytics strategy D02: Collect and process feedback from people affected by change D03: Provide sufficient information on the implementation

Shinohara et al., 2017 Shinohara et al., 2017 Kovrigin and Vasiliev, 2020

Data exchange between departments D04: Reduce variety of different systems for each department D05: Reduce competitive thinking between departments

EMPIRICAL STUDY To evaluate the importance of the recommendations for action for a successful implementation of intelligent support systems for manufacturing planning, an online survey was conducted in October 2022.

Questionnaire Design The study was implemented as an online questionnaire in the web application SoSci Survey®. The importance of the recommendations for action was assessed using a four-point scale (1 = unimportant to 4 = important). For the evaluation, mean value (M) and standard deviation (SD) were determined.

Additionally, the respondents were asked to assign each recommendation to one or more phases of a generic implementation process model. Therefore, a model illustration and brief description based on the following five phases was presented:

  • Phase 1: Goal and selection (determining the goal and purpose, and selecting the system to be implemented)
  • Phase 2: Planning (planning the implementation)
  • Phase 3: Preparation for implementation (preparing employees and workplace environment for the use of the system)
  • Phase 4: Implementation of the system (actual system implementation)
  • Phase 5: Review and adjustment (continuous review and adjustment of the system) Description of the Sample

The online questionnaire was completed by 31 participants from Germany (6 female, 25 male). The age of the participants ranged from Minimum = 26 years to Maximum = 66 years (M = 42.19 years, SD = 11.47 years). The participants covered a variety of industries and all had experience with the implementation of digital or intelligent support systems in enterprises. Among others, the following professional titles were named: research

associate, management consultant, research manager, process manager, production engineer, IT manager, and software developer. Systems introduced included: SAP S/4HANA®, ERP systems in general, digital worker assistance systems, digital twins, EXAPTsmartcontrol®, CAx systems, or various monitoring systems.

Evaluation of the Recommendations for Action for the Implementation of Intelligent Systems for Manufacturing Planning For the interpretation of the results (Table 5), the following assumptions were made: First, recommendations with M < 2 are not considered as important for the implementation success. Recommendations with 2 ≤M ≤4 are regarded as important. Second, a recommendation for action is assumed to be relevant for a phase if at least eight participants (25 %) assigned it to the respective phase. Only those phases are listed in Table 5.

Overall, the mean values (s. Table 5) show that all recommendations for action assessed are considered important for the implementation of intelligent support systems based on the assumption above (2.55 ≤M ≤3.81). The SD values can be used to examine the dispersion of responses around the corresponding mean value, assuming the central limit theorem (Fahrmeir et al., 2016). Based on this, the results (0.42 ≤SD ≤1.01) indicate a reasonably consistent assessment of relevance by the participants.

In the category organization, the mean values of all recommendations except for the detailed investment process planning (O05, M = 2.94, SD = 0.72) are higher than M = 3, indicating that they are considered at least rather important. Showing the highest assessed importance in relation to all recommendations, the assembly of a suitable implementation team appears to be particularly important (O01, M = 3.81, SD = 0.47). Also, the identification of short- and long-term goals seems to be important for implementation (O03, M = 3.77, SD = 0.42).

In the category people, only the consideration of external consultants (P12, M = 2.55, SD = 0.66) and hiring new employees (P13, M = 2.68, SD = 0.82) have mean values smaller than M = 3, indicating lower importance than the other people-related recommendations. Conducting employee training programs (P02, M = 3.61, SD = 0.55), involving stakeholders in the implementation planning (P06, M = 3.68, SD = 0.64), and a high commitment of managers (P08, M = 3.71, SD = 0.68) seem to be particularly important as they show the highest mean values within the category.

Regarding the technology-related results, the recommendation “provide suitable hardware” (T03, M = 3.26, SD = 0.76) was assessed as most important for the implementation success. According to the participants, the digitalization of existing business processes (T02, M = 3.00, SD = 0.76) is more important than the automation of adjacent manual processes (T01, M = 2.61, SD = 0.83).

Within the data-related recommendations for action, the participants considered the collection and processing of feedback from people affected (D02, M = 3.55, SD = 0.56) as well as the provision of sufficient information

Implementation Strategies for Intelligent Systems to Support Manufacturing Planning 95

Table 5. Descriptive statistics and allocation of phases.

Table available in the original PDF paper.

Recommendation for action M (SD) Phases

3.39 (0.61) 1, 2, 3

O01 Assemble suitable team for the implementation 3.81 (0.47) 1, 2, 3, 5 O02 Clearly distribute implementation responsibilities and tasks 3.48 (0.80) 1, 2, 3, 4, 5 O03 Identify short- and long-term goals for implementation 3.77 (0.42) 1, 2 O04 Communicate information about the change taking place

3.26 (0.80) 1, 2, 3, 4, 5

O05 Plan the investment process in detail 2.94 (0.72) 1, 2 O06 Make sufficient investment in staff (training, education etc.)

3.06 (0.84) 2, 3, 4, 5

P01 Plan training programs for employees 3.42 (0.71) 2, 3 P02 Conduct training programs for employees 3.61 (0.55) 3, 4, 5 P03 Adjust workload to create capacity for training programs

3.68 (0.64) 1, 2, 3, 4, 5

P04 Plan training programs for managers 3.35 (0.82) 2, 3 P05 Conduct training programs for managers 3.39 (0.79) 3, 4, 5 P06 Involve affected stakeholders in implementation planning

3.55 (0.56) 2, 3, 4, 5

P07 Identify resistance to implementation 3.26 (0.72) 1, 2, 3, 4, 5 P08 Managers show commitment 3.71 (0.68) 1, 2, 3, 4, 5 P09 Ensure support by managers 3.23 (0.83) 1, 2, 3, 4, 5 P10 Ensure simple operability 3.35 (0.74) 1, 2, 3, 4, 5 P11 Ensure data protection, work safety, and data security 3.55 (0.61) 1, 2, 3, 4, 5 P12 Consider collaboration with external consultants 2.55 (0.66) 1, 2 P13 Hire new employees with required competencies 2.68 (0.82) 2, 3, 4, 5 T01 Automate adjacent manual processes 2.61 (0.83) 2, 3, 4, 5 T02 Digitize existing business processes 3.00 (0.76) 1, 2, 3 T03 Provide suitable hardware 3.26 (0.76) 2, 3, 4 D01 Develop effective data analytics strategy 3.26 (0.57) 1, 2, 3, 5 D02 Collect and process feedback from people affected by change D03 Provide sufficient information on the implementation 3.55 (0.61) 1, 2, 3, 4 D04 Reduce variety of different systems for each department 3.10 (0.73) 1, 2, 3, 4, 5 D05 Reduce competitive thinking between departments 2.74 (1.01) 1, 2, 3, 4, 5

on the implementation (D03, M = 3.55, SD = 0.61) as most important recommendations. Less importance was seen in the reduction of competitive thinking between different departments (D05, M = 2.74, SD = 1.01). This recommendation shows the highest SD of all recommendations, indicating greater disagreement among participants in rating the importance of this aspect.

In the questionnaire, the participants had the opportunity to name further recommendations for action that they consider important. Several participants mentioned the involvement of employee representatives (e.g. workers’ council), risk analyses, and test phases as additional important recommendations. Furthermore, e.g., the use of agile methods, stakeholder analyses, and the assessment of the employees’ level of knowledge were mentioned.

When considering the relevance of the recommendations for action for the individual phases of the assumed implementation process model, it can

be noted that no recommendation for action was assigned exclusively to one phase. However, considering external consultants (P12), identifying goals (O03) and a detailed planning of the investment (O05) were seen as relevant specifically in the first two phases. While the planning of training programs for employees (P01) and managers (P04) was considered relevant in the second and third phases, their implementation (P02, P05) was rated as relevant from the third phase onwards. With exception of the category technology, several recommendations for action of each category were considered relevant in all phases, e.g., involving affected stakeholders (P06), sufficiently investing in staff (O06), and reducing the variety of different systems for each department (D04). Overall, 18 recommendations were considered relevant in the first phase, 25 in the second phase, 24 in the third phase, and 18 in each of the last two phases out of a total of 27 recommendations assessed.

DISCUSSION AND CONCLUSION Intelligent support systems seem to be a promising approach to support employees to perform increasingly complex manufacturing planning (cf. Burgert et al., 2022). However, existing implementation strategies for manufacturing support systems rather not focus on intelligent systems. Therefore, this paper contributes a systematic literature review to identify success factors and corresponding recommendations for action, and an empirical study to evaluate them in the context of intelligent support systems for manufacturing planning. As a result, 27 recommendations could be derived and assessed in terms of their importance and allocation to generic implementation phases as a basis for an implementation strategy for intelligent systems to support manufacturing planning.

The results show that all of the recommendations for action evaluated were considered relevant for the implementation of intelligent support systems. It can be noted that many aspects emphasize a strong reference to affected employees, as e.g. by conducting training programs, managing resistance, communicating information on the implementation, and assembling a suitable implementation team. This highlights the importance of involving employees in the implementation. The need for a participatory and human- centered implementation approach already proposed by Mütze-Niewöhner et al. (2022) can therefore be supported by the present results. However, the results indicate that not only employees but all affected stakeholders should be involved. In particular, the managers seem to play an important role with manager commitment seen as one of the most important aspects. Overall, the results suggest that many of the recommendations, especially those related to people, should accompany the entire implementation process.

However, the results of the systematic literature review are subject to limitations, e.g. arising from the subjective perspective of the researchers when deriving and aggregating recommendations. Concerning the empirical study, the validity of results is limited due to the sample size. Also, the additional recommendations mentioned by the participants indicated that further aspects could be certainly relevant. In order to further evaluate the

Implementation Strategies for Intelligent Systems to Support Manufacturing Planning 97

recommendations for action for the implementation of intelligent support systems for manufacturing planning, the recommendations should be applied in practice and critically reflected upon afterwards.

ACKNOWLEDGMENT

The research and development project CAM2030 is funded by the German Federal Ministry of Education and Research (BMBF) within the “Innovations for Tomorrow’s Production, Services, and Work” program (funding number: 02J19B081) and implemented by the Project Management Agency Karlsruhe (PTKA). The authors are responsible for the content of this publication. The authors would like to express their gratitude for this support.

REFERENCES

Albukhitan, S. (2020) ‘Developing Digital Transformation Strategy for Manufacturing’, Procedia Computer Science, 170, pp. 664–671. Available at: https://doi.org/10.1016/j.procs.2020.03.173. Azevedo, A. and Almeida, A. (2021) ‘Grasp the Challenge of Digital Transition in SMEs—A Training Course Geared towards Decision-Makers’, Education Sciences, 11(4), 151. Available at: https://doi.org/10.3390/educsci11040151. Bellantuono, N., Nuzzi, A., Pontrandolfo, P., and Scozzi, B. (2021) ‘Digital

Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature’, Sustainability, 13(23), 12941. Available at: https://do i.org/10.3390/su132312941. Bi, Z. and Wang, X. (2020) ‘Computer Aided Manufacturing (CAM)’, in Bi, Z.

and Wang, X. (eds.) Computer Aided Design and Manufacturing. Hoboken, USA: John Wiley & Sons, pp. 367–411. Available at: https://doi.org/10.1002/ 9781119667889.ch9. Booth A. (2006) ‘“Brimful of STARLITE”: toward standards for reporting literature searches’, Journal of the Medical Library Association, 94(4), pp. 421–430. Available at: https://pubmed.ncbi.nlm.nih.gov/17082834/. Burgert, F. L., Schirmer, M., Harlacher, M., Nitsch, V., and Mütze-Niewöhner,

S. (2022) ‘Analyse der Arbeit von CAM-Planenden als Grundlage für die Entwicklung intelligenter Unterstützungssysteme für die Prozessplanung’, in Gesellschaft für Arbeitswissenschaft e. V. (ed.) Technologie und Bildung in hybriden Arbeitswelten: 68. Kongress der Gesellschaft für Arbeitswissenschaft. Sankt Augustin: GfA-Press, B.10.3. Available at: https://doi.org/10.18154/RWTH -2022-02442. Dripke, C., Höhr, S., Csiszar, A., and Verl, A. (2017) ‘A Concept for the Application of Reinforcement Learning in the Optimization of CAM-Generated Tool Paths’, in Beyerer, J., Niggemann, O., and Kühnert, C. (eds.) Machine Learning for Cyber Physical Systems. Berlin: Springer Vieweg, pp. 1–8. Available at: https://doi.org/ 10.1007/978-3-662-53806-7_1. Fahrmeir, L., Heumann, C., Künstler, R., Pigeot, I., and Tutz, G. (2016) Statistik:

Der Weg zur Datenanalyse. 8th ed. Berlin: Springer. Available at: https://doi.org/ 10.1007/978-3-662-50372-0. Geissbauer, R., Vedso, J., and Schrauf, S. (2016) Industry 4.0: Building the Digital Enterprise. PwC. Available at: https://www.pwc.com/gx/en/industries/industrie s-4.0/landing-page/industry-4.0-building-your-digital-enterprise-april-2016.pdf (Accessed: 09 February 2023).

Jayasekara, D., Pawar, K., and Ratchev, S. (2019) ‘A Framework to Assess Readiness of Firms for Cloud Manufacturing’, 2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC), pp. 1–12. Available at: https://doi.org/10.1109/ice.2019.8792648. Kandler, M., May, M. C., Kurtz, J., Kuhnle, A., and Lanza, G. (2022) ‘Development

of a Human-Centered Implementation Strategy for Industry 4.0 Exemplified by Digital Shopfloor Management’, in Andersen, A.-L., Andersen, R., Brunoe, T. D., Larsen, M. S. S., Nielsen, K., Napoleone, A., and Kjeldgaard, S. (eds.) Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems. Cham: Springer Nature, pp. 738–745. Available at: https://doi.org/10.1007/978- 3-030-90700-6_84. Kletti, J. (2007) Konzeption und Einführung von MES-Systemen: Zielorientierte Einführungsstrategie mit Wirtschaftlichkeitsbetrachtungen, Fallbeispielen und Checklisten. Berlin: Springer. Available at: https://doi.org/10.1007/978-3-540-34311-0. Kovrigin, E. A. and Vasiliev, V. A. (2020) ‘Barriers in the Integration of Modern Digital Technologies in the System of Quality Management of Enterprises of the Aerospace Industry’, 2020 International Conference Quality Management, Transport and Information Security, Information Technologies (IT&QM&IS), pp. 331–335. Available at: https://doi.org/10.1109/itqmis51053.2020.9322960. Lundborg, M. and Gull, I. (2021) Künstliche Intelligenz im Mittelstand. So

wird KI für kleine und mittlere Unternehmen zum Game Changer. Bad Honef: Begleitforschung Mittelstand-Digital. Available at: https://www.mittelstan d-digital.de/MD/Redaktion/DE/Publikationen/ki-Studie-2021.html (Accessed: 09 February 2023). Merhar, L., Berger, C., Braunreuther, S., and Reinhart, G. (2019) ‘Digitization of Manufacturing Companies: Employee Acceptance Towards Mobile and Wearable Devices’, in Ahram, T. Z. (ed.) Advances in Intelligent Systems and Computing. Advances in Human Factors in Wearable Technologies and Game Design. AHFE 2018. Advances in Intelligent Systems and Computing, vol. 795. Cham: Springer, pp. 187–197. Available at: https://doi.org/10.1007/978-3-319-94619-1_18. Merkel-Kiss, M. and von Garrel, J. (2022) ‘Systematische Literaturanalyse zum KI-Einsatz und KI-basierten Geschäftsmodellen in produzierenden kleinen und mittleren Unternehmen’, Zeitschrift für Arbeitswissenschaft, pp. 331–335. Available at: https://doi.org/10.1007/s41449-022-00323-9. Mütze-Niewöhner, S., Mayer, C., Harlacher, M., Steireif, N., and Nitsch, V. (2022)

‘Work 4.0: Human-Centered Work Design in the Digital Age’, Handbook Industry 4.0: Law, Technology, Society, pp. 985–1019. Available at: https://doi.org/10. 1007/978-3-662-64448-5_52. Page, M. J., McKenzie, J. E., Bossuyt, P. M., Boutron, I., Hoffmann, T. C., Mulrow, C. D., Shamseer, L., Tetzlaff, J. M., Akl, E. A., Brennan, S. E., Chou, R., Glanville, J., Grimshaw, J. M., Hróbjartsson, A., Lalu, M. M., Li, T., Loder, E. W., Mayo- Wilson, E., McDonald, S., McGuiness, L. A., Stewart, L. A., Thomas, J., Tricco, A. C., Welch, V. A., Whiting, P., and Moher, D. (2021) ‘The PRISMA 2020 statement: an updated guideline for reporting systematic reviews’, BMJ, 372: n71, pp. 1–9. Available at: https://doi.org/10.1136/bmj.n71. Shinohara, A. C., da Silva, E. H. D. R., de Lima, E. P., Deschamps, F., and da Costa,

S. E. G. (2017) ‘Critical success factors for digital manufacturing implementation in the context of industry4.0’, Proceedings of the 2017 Industrial and Systems Engineering Conference, pp. 199–204.

Implementation Strategies for Intelligent Systems to Support Manufacturing Planning 99

Suhl, L. and Isenberg, F. (2019) ‘Production Optimizer. Mehrteiliges Konzept zur Planung der Fertigung’, in Dangelmaier, W. and Gausemeier, J. (eds.) Intelligente Arbeitsvorbereitung auf Basis virtueller Werkzeugmaschinen. Berlin: Springer Vieweg, pp. 121–149. Available at: https://doi.org/10.1007/978-3-662- 58020-2_5. Tarlatt, A. (2001) Implementierung von Strategien im Unternehmen. Wiesbaden:

Deutscher Universitätsverlag. Available at: https://doi.org/10.1007/978-3-322- 90319-8.

Cover of the proceedings volume Human Aspects of Advanced Manufacturing

Explore the complete digital volume

Human Aspects of Advanced Manufacturing

Read this individual research paper free through the original publisher, or explore the full digital proceedings book.

ISBN 978-1-958651-56-8

Explore this ISBN in the AHFE Bookstore Listed in the July 2026 bookstore catalogue; search by ISBN to confirm current availability · Digital book purchase optional

Explore Related Research

Related research 8 matches

More papers from this volume

← Back to Research ExplorerBrowse the full library →