Skip to article
AHFE AHFE Discoveries AHFE International Open Access Journal
AHFE OPEN ACCESS OPEN ACCESS CONFERENCE PROCEEDINGS PAPER

A Study of the Impulse Noise for the Protecting Earplug Performance

Publication year
Digital Object Identifier10.54941/10020

Abstract

The objective of this study is the frequency of the noise source 170 dB level of impulse noise attenuation performance by earplugs to identify, to analyze the frequency characteristics of a shape and pattern. The impulse noise of the frequency earplug in order to analyze the impulsive noise attenuation performance for the analysis of the noise source equipment was built. In order to check the noise attenuation performance and noise attenuation performance Ear simulator production was verified. Previous studies have most transportation and public noise, even in the noise source for sound levels were 140 dB, but this study is higher than that of the impulsive noise source features. The result of the impulsive noise attenuation effect is frequency-dependent mean 28.58 dB.

INTRODUCTION

IMPULSIVE NOISE PERFORMANCE OF THE EARPLUGS Impulsive noise research on the performance of the earplugs can’t be found in Korea, but EU and America international researches about this issue have been actively studied. Patterson as the some of the case studies used in a wide variety of military protective equipment, hearing the sound insulation performance of every targets were analyzed by Matti et al. Defined with respect to a wide range of canvas with protective equipment for each source of noise attenuation have studied. Buck K. researched the ANR (Active Noise Reduction) for electrical protective equipment, and used to offset the noise attenuation analysis for the case studies. Impulsive noise generated in the confined space about the dangers of human bodies and ergonomics studies are performed by Richard Price.

EXPERIMENTAL DESIGN This study used in measured by 3M Foam Earplug 1110 Corded (Product Code: 0-51138-29009-7, NSN: 50051138- 2900907) and Ultra-fit Earplug (Product Code: 370-1000, NSN: 6515-01-466-2710). In case of the operator has to wear the hearing protection devices to find out the noise insulation performance, the experiments were carried out by the B&K HATS. Result of the B&K HATS are expected in the noise insulation performance did not come out did not get it closed. And it was confirmed that the condition is not perfect. B&K HATS used for the performance test for continuous noise and impulse noise, in order for the impulsive noise experiments is required for head and torso simulator. Thus, the noise insulation performance of earplugs to ensure an accurate decided to use the simulator was followed by a commercially available simulator followed by less than the limit of 170 dB sound pressure produced by the simulator, but then followed by a direct experiment was conducted. Following the simulator used in sound pressure sensor is the B & K 4944A.

RESULT

Table 1 : Attenuation Result of Pair T-test for Ear Simulator Earplug Type Original Sound - 3MFoam1110 Original Sound - Ultrafit 3MFoam1110 - Ultrafit

CONCLUSIONS

REFERENCES

Cover of the proceedings volume Advances in Physical Ergonomics and Human Factors: Part I

Explore the complete digital volume

Advances in Physical Ergonomics and Human Factors: Part I

Read this individual research paper free through the original publisher, or explore the full digital proceedings book.

ISBN 978-1-4951-2104-3

Explore this ISBN in the AHFE Bookstore Listed in the July 2026 bookstore catalogue; search by ISBN to confirm current availability · Digital book purchase optional

Explore Related Research

Related research 8 matches

More papers from this volume

← Back to Research ExplorerBrowse the full library →